Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Fox Chase Homeowners
A fireplace that smokes into the room, smells of creosote in July, or won’t hold a pilot flame is telling you something is wrong with the system behind the hearth. Fireplace repair in Fox Chase means finding that cause inside the firebox, damper, or flue and fixing it with materials that hold up to real burning. We’re a chimney specialist, not a handyman with a caulk gun: our technicians have up to 9 years of experience, and we work with the same professional-grade brands chimney tradespeople rely on. First visit is a free estimate, so you know the scope before anything is booked. Call (844) 526-7704 and we’ll get a technician out to look.
What Our Fireplace Repair Service Includes
Every job starts with an inspection, because the problem you feel in the room is often downstream of something in the chimney. Here’s what each part of the work covers.
Gas Fireplace Repair
Gas units fail in a handful of predictable places: the pilot assembly, the thermocouple or thermopile, the valve, or the burner itself. When the flame won’t light, lights and dies, or the logs soot up, those components are where we look first. We test the ignition sequence, check gas flow at the connection, confirm the venting is clear, and replace what’s failed. If the issue traces back to the flue, we handle that side too, which is why it helps to have one company on the whole system.
Wood Burning Fireplace Repair
Wood fireplaces take a beating from heat cycling, and the damage shows up in the firebox brickwork, the mortar joints, and the damper. A wood burner that smokes, drafts poorly, or leaves a strong smell in the house usually has a cracked firebox, a warped damper, or a flue restriction. We inspect the firebox and flue, repair the masonry with heat-rated refractory mortar, and address the draft problem rather than masking it. If a flue liner is deteriorated, we’ll show you the camera evidence before recommending anything.
Fireplace Insert Service
Inserts sit inside the firebox and connect to their own liner, and both halves need to be right for the unit to burn cleanly. We service gas and wood inserts, checking the surround seal, the blower, the liner connection, and the gaskets. If your insert smokes when the door is closed, runs cool, or smells when it’s off, the liner connection or the door seal is a likely culprit. We’ll pull the surround, inspect the connection, and reseal or repair as needed.
Damper Repair
The damper is the plate that opens and closes the flue, and when it sticks, rusts, or won’t seal, you lose control of the fire. A damper stuck open lets heated air out of the house all winter; one stuck closed sends smoke into the room. We free stuck dampers, replace pivot pins and frames, and install new dampers when the old one is beyond repair. After the fix, we check that it opens, closes, and seats flat.
Firebox Repair
The firebox is the chamber that holds the fire, and it’s built from brick, refractory mortar, or a pre-fab metal box. Cracks in the mortar, spalling brick faces, and rust-through on metal boxes all need repair before they get worse, since heat finds those gaps. We rebuild mortar joints with refractory materials, repair or replace firebox panels, and confirm the box is sound before you burn again. If the damage reaches the surrounding structure, we’ll tell you plainly what that means.
Pilot Light Repair
A pilot that won’t stay lit is usually a dirty orifice, a weak thermocouple, or a thermopile that isn’t generating enough voltage to hold the valve open. We clean the assembly, test the voltage, and replace the failed part so the pilot holds. If the pilot lights but the main burner won’t, the valve or the wall switch is next on the list. Either way, gas work should stay with a trained technician, not a homeowner with a wrench.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with Olympia Chimney components when a repair involves venting or a liner connection, because those parts are engineered to match the appliance and the flue. Olympia equipment has specific connection points and clearances, and we know where they wear and where they need to be checked after a repair.
Famco and Copperfield both show up in the fireplaces and dampers we see around Fox Chase, and each has its own quirks when it comes to seals, frames, and clearances. We’ve worked on both enough to know what fails first and what a proper repair looks like. When the chimney side needs relining, DuraFlex flexible liner systems are in our toolkit for code-compliant work in existing masonry flues. Whether you have Famco, Copperfield, Olympia Chimney, or another make entirely, we can help.
Signs You Need Fireplace Repair Right Now
Some problems can wait a season. These five are worth a call before you light another fire.
- Smoke rolling into the room. A fireplace that smokes with the damper open usually has a blocked flue, a damaged damper, or a draft problem the house didn’t have before. Smoke in the room is a sign the system isn’t venting, and that’s worth checking before the next fire.
- A strong smell when the fireplace is off. Creosote and soot odors in the house point to a flue that’s dirty, blocked, or leaking at a joint. The smell gets worse in warm, humid weather, and it often means the flue needs attention, not just a spray.
- Cracked or crumbling firebox mortar. Heat opens mortar joints over time, and gaps let heat reach the structure behind the firebox. Repointing with refractory mortar is a straightforward fix early; letting it go turns into a bigger rebuild.
- A damper that sticks or won’t seal. If you can’t open or close it fully, you can’t control the fire or keep heated air from escaping up the flue all winter. That’s a repair, not a habit to work around.
- A pilot that won’t stay lit or a burner that won’t light. Gas ignition problems can mean a failed thermocouple or a valve issue, and they involve fuel. This is one to have a trained technician check rather than troubleshoot yourself.
Our Fireplace Repair Process – Step by Step
- 1
Free estimate and intake. We start by asking what you’ve noticed and when it started, then look at the firebox, damper, and flue. You get a written scope and price before anything is booked, so there are no surprises on the invoice.
- 2
Inspection with a camera. We run a camera through the flue and inspect the firebox, damper, and connections. You see the same footage we do, so when we say a liner is deteriorated, you can verify it yourself.
- 3
Findings and options. We explain what we found, what it means, and what the repair involves, in plain terms. If part of the job can safely wait, we say so and note it for later rather than rolling it into the quote.
- 4
The repair itself. We repair the firebox with heat-rated mortar, free or replace the damper, service the insert, or fix the ignition components, using professional-grade materials. On the chimney side we handle caps, crowns, and liners in the same visit when needed.
- 5
Testing and a final walkthrough. We run the fireplace, check the draft, confirm the damper operates, and leave you with a clear picture of what was done. If a follow-up sweep is due, we’ll tell you when.
The whole chimney system is connected, which is why a Chimney Sweep Fox Chase visit often uncovers problems on the hearth side, and a hearth problem often traces back up the flue.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Fox Chase?
Fireplace repair in Fox Chase typically runs from about $150 for a minor damper adjustment to $1,800 or more for firebox reconstruction, depending on what’s failed and how far the damage reaches. Here’s a rough guide to the common scenarios:
| Repair | Typical estimated cost |
|---|---|
| Pilot light or thermocouple replacement | $150 – $350 |
| Damper repair or replacement | $250 – $600 |
| Firebox mortar and brick repair | $400 – $1,200 |
| Insert service or liner connection reseal | $300 – $900 |
| Full firebox rebuild | $1,200 – $1,800+ |
What drives the price is the material and access: refractory mortar costs more than standard mortar, gas components depend on the model, and a firebox repair that reaches behind the surround takes more labor than a surface fix. To avoid overpaying, get the scope in writing and ask whether anything on the list can wait. Our free estimate covers the inspection, the camera check, and a written scope, and the price on that sheet is the price we work to. If the chimney side needs a reline, that’s quoted separately, and we’ll show you the evidence first. Nothing is recommended without camera footage you can see for yourself, and we’ll say plainly when a repair can safely wait.
Fireplace Repair Near Fox Chase – Our Service Area
We cover Fox Chase and the surrounding neighborhoods, including fireplace repair work in Chestnut Hill, Upper Moreland, Roxborough, Manayunk, Upper Dublin, and Whitemarsh. Most jobs within that footprint get scheduled as a normal appointment; we don’t promise same-day, but we do keep the estimate free and the scope honest. Closer in, we can usually slot you quickly. Just call with your address and what you’ve noticed. For the Chestnut Hill side, those older stone homes often need a careful look at the firebox before a repair, and that’s fine with us.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Fox Chase
Fireplace repair is fixing the parts of the fireplace that make it burn safely and draft correctly: the firebox, the damper, the gas ignition components, the insert connection, and any flue issue affecting the fireplace. It’s separate from a routine sweep, which cleans soot and creosote. We do both, which means we can diagnose the whole system in one visit. Call (844) 526-7704 for a free estimate.
Most repairs take one visit of one to three hours, depending on the job. A pilot light or damper repair is often done within the hour, while firebox mortar work or an insert reseal takes longer. A full firebox rebuild is scheduled as its own job. We’ll give you a time estimate with the written scope. Call us and we’ll talk through your situation.
Typical costs run from about $150 for a pilot or thermocouple repair up to $1,800 or more for a full firebox rebuild. Damper work usually lands between $250 and $600, and firebox mortar repair between $400 and $1,200. The written estimate sets the final price, and the estimate itself is free. Call (844) 526-7704 for an exact quote.
Yes, we service Olympia Chimney, Famco, Copperfield, and DuraFlex equipment, along with other makes. Each brand has its own connection points and clearances, and we’ve worked on them enough to know where they wear. If your unit is a brand we don’t name here, it’s still worth a call. We’ll tell you upfront whether we can help.
Same-day repair is often possible when the schedule allows, and we don’t promise it before we’ve confirmed it. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. We’re closed Saturday; a call that day gets booked into the next opening. Call (844) 526-7704 and we’ll get you scheduled.
Repair work is backed by the materials and workmanship standards of the manufacturers whose products we install, and any specific coverage is spelled out in your written estimate. We don’t hand out warranty terms verbally and leave it there; you’ll have the details on paper. Ask about it when we quote the job, and we’ll explain what applies to your repair.
Clear the hearth area and the floor in front of the fireplace, and remove anything fragile or flammable from the surround. If it’s a gas unit, make sure the gas is on and note whether the pilot has been lit lately. Have a rough timeline of when the problem started; it helps us narrow the cause. For wood burners, don’t burn for 24 hours before the visit. Call us with any questions before the technician arrives.
Schedule Your Fireplace Repair Service in Fox Chase Today
A fireplace worth burning in is a fireplace that’s been checked and repaired properly. We’ll inspect it, show you what we found, and give you a free estimate before anything is booked. Whether it’s a damper, a pilot light, or a firebox that needs rebuilding, the fix should last, not get patched until next season. Call (844) 526-7704. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. No-obligation estimate, and no pressure to do anything that can wait. You can also reach our fireplace repair team for the Upper Moreland area, and see our fireplace repair overview for a full list of what we handle.
Written by the team at Chimney Sweep Fox Chase.