Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Wynnefield
If you’re in Wynnefield and your chimney is showing its age, you’re in good company. The 1920s – 1940s stone-and-brick twins and rowhouses that line these streets were built with masonry fireplaces and clay-tile flues sized for coal-era and early wood burning, and many of those flues have never been relined since the house switched to gas or oil. We work on chimneys like yours routinely, and we know what usually goes wrong and where. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday. Call (844) 526-7704 for a free estimate, and we’ll tell you what we found, what it means, and what fixing it actually involves.
Why Wynnefield Homeowners Call Chimney Sweep Fox Chase for Chimney Repair
We know the housing here. Wynnefield’s twins often share a single exterior chimney stack with the neighboring unit across a party wall, and that one detail changes how a repair gets scoped. Repointing or rebuilding one side can affect the flue serving the other, so we settle the party-wall and flashing details before any mortar comes down. That’s the kind of local knowledge you only get by working in a neighborhood, not by reading a manual.
Our technicians have up to 9 years of experience, and we handle the full range of chimney work under one company: sweeping, cap and crown, repair, liner installation, and complete rebuilds. We work with professional-grade materials – the brands chimney specialists rely on, like HeatShield and DuraFlex – never big-box substitutes. We tell you what we found and show you the footage. Nothing is recommended without camera evidence you can see for yourself. Estimates are free, and the written estimate sets the final price.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Wynnefield
Chimney repair covers a lot of ground, from a little mortar work at the roofline to a full stack rebuild. Here’s what we do most in Wynnefield, and why each one matters on these older homes.
Mortar Repointing
Years of freeze-thaw winters work the mortar joints loose on exterior brick-and-schist stacks. Repointing cuts out the failing mortar and replaces it with fresh material so the stack stays sound and water stays out. On a shared twin chimney, we settle access and scope with both owners before a mason starts.

Spalling Brick Repair
Spalling is when the face of a brick flakes and pops off, usually after water gets in and freezes behind it. We replace the damaged brick and address what let the water in, because patching the face without fixing the moisture source just means it happens again next winter. It’s a common find on Wynnefield’s exterior stacks.

Chimney Waterproofing
A breathable waterproofing treatment on the masonry keeps water out while letting the brick dry from the inside. Philadelphia’s humid summers and freeze-thaw winters are hard on these stacks, and waterproofing is one of the simpler ways to slow that wear. The bricks may look fine from the ground, but on camera the damage is often clear.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the usual path for water tracking down past the roofline and into the smoke chamber. Wynnefield’s tree-lined streets often have overhanging copper gutters that change how water sheds around the stack. We repair or replace flashing so the roof-to-chimney joint stays sealed.
We also handle tuckpointing, chimney rebuilding, cap and crown work, liner installation, and fireplace repair. From your first sweep to a full rebuild, one company handles it. See our full chimney repair services for the complete list.
Trusted Brands We Service in Wynnefield
We use professional-grade chimney systems and materials, not hardware-store substitutes. That means HeatShield ceramic resurfacing for flue liners that are deteriorating but don’t need full replacement, and DuraFlex flexible stainless liners for relining existing masonry chimneys to code. We also work with Famco and Copperfield components for caps and related work. We don’t stock parts on a truck, so we order what your job actually calls for and keep the turnaround tight. The right material for the right repair is part of doing the job to last.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Wynnefield Homes
- Creosote glazed onto an old clay liner. A flue sized for coal and early wood, then fed by decades of gas or oil appliances, can build up a tar glaze a brush can’t touch. That’s a job for a proper inspection, not a bigger brush.
- Freeze-thaw spalling of the crown and mortar wash. On exterior brick-and-schist stacks, water gets into the crown, freezes, and breaks the surface apart, letting water track down past the flashing.
- Cracked or offset clay-tile liners at the roofline. The original 1930s – 40s tile is often offset or cracked exactly where the stack passes through the low-pitch roof. Invisible from the ground, obvious on camera from the top.
- Obsolete flues venting modern appliances. Many Wynnefield homes converted from coal or oil to gas, leaving flues that were never designed for what’s venting into them now. These need inspection before you assume they’re fine.
Pricing for Chimney Repair in Wynnefield, PA
Chimney work isn’t one price, but you deserve real numbers, not a shrug. A typical mortar repointing job in Wynnefield runs roughly $450 – $1,200, depending on how much of the stack is involved and whether it’s a shared twin. Spalling brick repair generally lands around $300 – $900. Chimney waterproofing is often in the $250 – $600 range for a standard stack. Flashing repair typically runs $350 – $850, and tuckpointing falls in a similar band to repointing. A full chimney rebuild is a bigger project and gets scoped individually. What moves the number is access, the condition of the crown and mortar, and whether the stack is shared. The written estimate sets the final price, and the estimate itself is free.
We Also Serve Cities Near Wynnefield
Wynnefield sits close to plenty of neighborhoods where we also work, and the chimneys there share the same age and the same problems. Along with serving Wynnefield, we take chimney repair calls in Manayunk, Roxborough, Chestnut Hill, and Whitemarsh. If you’re in any of them, the process is the same: we inspect, show you the camera footage, and scope the work honestly.
Serving Wynnefield, PA – Our Local Coverage Area
We serve Wynnefield and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Wynnefield
That’s a party-wall question, and the honest answer is it depends on how your deed and shared-wall agreement are written – that’s a conversation for both owners, not a decision a chimney company should make for you. What we can do is inspect the shared stack, determine which flue and which masonry face each unit is responsible for, and give you a written scope both owners can review. Where access crosses the party wall, we get that settled before any mortar comes down. Call (844) 526-7704 to set up a free estimate.
You know it’s real when you’ve seen the footage yourself. A full rebuild is the most over-sold recommendation in this trade, and it should never come from a glance at the roofline. Ask for a Level 2 inspection with a camera run from the top, and ask to see the video showing the crack or offset. In a Wynnefield twin, the defect is often exactly where the stack passes through the roofline – a spot you can’t see from the ground but the camera can. If the liner can be resurfaced with HeatShield or relined with a stainless system, that’s usually the better call than a rebuild. Get the camera evidence first, then decide. Call (844) 526-7704 for a free estimate.
Not necessarily. A clay flue that was sized for coal or early wood and has since been vented by a gas furnace is often wrong-sized or deteriorating for its current job, and an undersized or cracked flue can affect how the appliance drafts. The right answer comes from inspecting that specific flue, not applying a blanket rule. If a DuraFlex stainless liner is the correct fix, we’ll say so and show you why; if the flue is sound, we’ll tell you that too. Nothing gets recommended without camera evidence. Call (844) 526-7704 for a free estimate.
Water gets into small cracks in the crown or behind the flashing, freezes overnight, expands, and breaks the surface apart a little more each cycle. On Wynnefield’s exterior brick-and-schist stacks, that shows up as spalling on the crown and mortar wash and as water tracking down past the flashing into the smoke chamber. Left alone, it gets worse every winter. Repointing, crown repair, and flashing repair are the usual fixes, and waterproofing helps slow the next round. Call (844) 526-7704 for a free estimate.
That musty smell is usually humid summer air moving down an unused flue and picking up old creosote and soot residue. Yes, it can still need attention even if you never burn – an unused flue can collect debris and moisture, and the chimney still needs a look. A sweep and inspection tells you whether the smell is just stale residue or a sign of a liner or mortar problem. We don’t recommend work you don’t need, so if it’s fine, we’ll say so. Call (844) 526-7704 for a free estimate – we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Whether your chimney needs repointing, waterproofing, flashing repair, or a closer look at a century-old clay liner, we’ll inspect it, show you the camera footage, and scope the work honestly. Call (844) 526-7704 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fox Chase.