Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Liner & Rebuild for Fox Chase Homeowners
A cracked flue liner or a chimney crown that’s crumbling at the top is the kind of problem that doesn’t fix itself, and it doesn’t get cheaper by waiting. In Fox Chase, where a lot of the housing stock is older masonry with original clay tile liners, we see the same pattern again and again: a liner that has spalled and cracked after years of heating and cooling cycles, a chimney that’s pulling in water through a failed crown, or a fireplace that smokes because the flue was never sized right for the appliance. Our technicians have up to 9 years of experience reading exactly these conditions, and we tell you what we found, what it means, and what fixing it actually involves before any work is booked. For liner and rebuild work that needs more than a cleaning, we run camera inspections and include a photo report so you can see the evidence yourself. Call (844) 526-7704 and we’ll get a sweep on the schedule.
What Our Chimney Liner & Rebuild Service Includes
Liner and rebuild work covers the structural and venting side of your chimney: the flue that carries smoke and gases up and out, and the masonry around it. We handle six distinct kinds of work under this category, and each one solves a different problem.
Stainless Steel Liner
A stainless steel liner is a rigid or semi-rigid pipe that gets installed inside your existing flue to create a sealed, code-compliant venting path. You need one when the original clay tile liner is cracked, misaligned, or simply the wrong size for a modern appliance like a wood stove or high-efficiency insert. We size the liner to the appliance and the chimney’s actual dimensions, then insulate and cap it so it drafts correctly and stays protected.
Flexible Liner
A flexible liner is the same idea in a corrugated stainless form, which lets it follow the offsets and bends in an older masonry chimney that a rigid pipe can’t navigate. It’s the common choice for chimneys with a curve or a flue that’s been relined before. We use DuraFlex flexible systems for this kind of relining, and we check the run before installation so the liner seats cleanly without kinks that would restrict draft.
Liner Replacement
Liner replacement means removing a failed liner, clay tile or otherwise, and installing a new one in its place. It’s the right call when the existing liner has breaks, gaps, or missing sections that a repair can’t safely bridge. We document the condition with a camera inspection first so you can see exactly why replacement is being recommended, then we install a new liner with proper clearances and connections.
Partial Rebuild
A partial rebuild addresses the part of the chimney that’s damaged, usually the section above the roofline where water, freeze-thaw cycles, and weather do the most work. You need it when the crown, the top courses of brick, or the flashing have failed but the lower chimney is still sound. We remove and rebuild the damaged section with matching masonry, then correct the crown and flashing so water sheds away instead of soaking in.
Full Chimney Rebuild
A full rebuild is for a chimney that’s leaning, badly deteriorated, or structurally unsafe from the foundation up, and it means taking the chimney down and reconstructing it. It’s the heaviest job in this category and the one that most needs a clear-eyed assessment up front. We walk the whole structure, explain what’s failing and why, and lay out what a rebuild involves so you know the scope before committing.
Liner Repair
Liner repair restores a flue that has localized damage rather than a liner that’s failed entirely. For deteriorating clay tile, we apply HeatShield ceramic resurfacing, which rebuilds the liner’s inner surface without pulling the whole thing out. It’s a specialized option that most sweep-only companies can’t offer, and it’s often the right answer when the damage is moderate and the structure is otherwise sound.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Liner & Rebuild
We work with professional-grade chimney brands, the same materials chimney specialists rely on, not big-box substitutes. DuraFlex flexible liner systems are part of our toolkit because they handle the offsets and bends common in older Fox Chase masonry chimneys, and knowing where a DuraFlex install typically wears or needs attention helps us get the fit right the first time. Olympia Chimney products come up often in liner and venting work, and we know the points where those systems tend to need inspection as they age.
HeatShield is our go-to for ceramic flue resurfacing, and we apply it as a certified solution when a liner needs more than a cleaning but doesn’t warrant full replacement. We also work with Famco and Copperfield components where the job calls for them. Whether you have DuraFlex, Olympia Chimney, HeatShield, Famco, Copperfield, or Gelco, or any other make, we can help, and we’ll tell you honestly when a repair will do and when a replacement is the better call.
Signs You Need Chimney Liner & Rebuild Right Now
Some chimney problems announce themselves. Others only show up on a camera inspection. Here’s what we watch for, and what each sign means.
- Smoke backing into the room. If your fireplace puffs smoke into the house instead of drafting up and out, the flue may be blocked, undersized, or compromised. It’s a draft problem, and it usually points to a liner or flue issue that needs to be diagnosed rather than guessed at.
- Crumbling mortar or loose bricks at the top. When the crown or the upper courses are spalling and the mortar joints are washing out, water is getting in. Left alone, that damage works its way down and turns a partial rebuild into a much bigger job.
- Visible cracks or gaps in the flue tiles. Cracked clay tiles let heat and gases escape into the masonry and the house structure, and they can let carbon monoxide into living spaces. This is a safety issue, not a cosmetic one, so it’s worth a camera inspection to see the full extent.
- Water stains or a musty smell near the chimney. Staining on the ceiling or walls near the chimney, or a damp, smoky smell, often means the crown or flashing has failed and water is finding its way in. A failed crown is one of the leading causes of chimney water damage, and it’s fixable before it spreads.
- A fireplace that’s never drafted well. If your fireplace has always smoked or burned poorly, the flue may simply be the wrong size for the firebox, or a prior liner may be improperly installed. A properly sized liner usually corrects a draft problem that no amount of firewood adjustment will fix.
Our Chimney Liner & Rebuild Process – Step by Step
We don’t recommend liner or rebuild work without evidence you can see for yourself. Here’s how a job runs from first call to final inspection.
- 1
Camera inspection and photo report. We run a camera down the flue and inspect the exterior of the chimney, the crown, the flashing, and the firebox. You get photos of what we found so the condition is documented, not just described.
- 2
Straight assessment and options. We explain what the inspection showed, what it means for how your chimney vents, and what the realistic repair or replacement options are. We tell you plainly when work can safely wait and when it shouldn’t.
- 3
Written estimate and material selection. You get a written estimate that sets the final price, and we walk through the material choices, whether that’s a DuraFlex flexible liner, a HeatShield resurfacing, or masonry for a rebuild.
- 4
The work itself. Liner installation, resurfacing, or rebuild proceeds to code, with the flue sized correctly for your appliance and the crown and cap corrected to shed water. We keep the work area contained and clean.
- 5
Final inspection and walkthrough. We verify the install with a final check, confirm the draft, and walk you through what was done and what to watch for going forward.
Because we handle the whole chimney system (sweeping, cap and crown work, chimney repair, liner and rebuild, and fireplace repair), you’re not coordinating three different contractors to fix one chimney.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Fox Chase?
Liner and rebuild pricing depends on the size and condition of your chimney, the material you choose, and how much masonry has to come down and go back up. Here’s a typical range to plan around. These are estimates; the written estimate sets the final price.
| Work | Typical Estimated Range |
|---|---|
| Liner inspection with camera and photo report | Included in the estimate |
| HeatShield ceramic resurfacing (liner repair) | $1,200 – $2,800 |
| Stainless or flexible liner installation | $2,200 – $5,500 |
| Partial rebuild (crown, upper courses, flashing) | $2,500 – $6,000 |
| Full chimney rebuild | $6,000 – $15,000+ |
What affects the price: the height and configuration of the chimney, whether the flue has offsets or bends (which favor a flexible liner over rigid), the appliance the liner must serve, how much damaged masonry has to be removed, and access to the roof. How to avoid overpaying: get the camera evidence first, insist on a written estimate that sets the final price, and don’t accept a rebuild recommendation without seeing why a repair won’t hold. What’s included in our free estimate: the camera inspection, photo report, and a written scope with material choices. Call (844) 526-7704 for an exact quote.
Chimney Liner & Rebuild Near Fox Chase – Our Service Area
We provide chimney liner & rebuild service in Fox Chase and work with homeowners across the surrounding communities, including Chestnut Hill, Upper Moreland, Roxborough, Manayunk, Whitemarsh, and Ambler. Response timing depends on the job and the season, so we book sweeps and schedule estimates as openings come up, and we’ll give you a clear window when you call. If you’re in a nearby town like Upper Dublin, Maple Glen, Warminster Heights, Wynnefield, or Upper Southampton, we can help there too. For a full look at everything we handle, see our main Chimney Sweep Fox Chase page.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Liner & Rebuild in Fox Chase
A chimney liner and rebuild covers the venting pipe inside your chimney (the liner) and the masonry structure around it (the rebuild). The liner carries smoke and gases safely up and out, while the rebuild repairs or reconstructs damaged brick, mortar, crown, and flashing. We handle both because a liner can only do its job if the chimney around it is sound.
A liner installation usually takes a day, while a partial rebuild typically runs one to three days and a full rebuild can take longer depending on the scope. The timeline depends on the chimney’s height, access, and how much masonry is involved. We’ll give you a realistic schedule with your written estimate so you know what to plan for.
A liner installation in Fox Chase typically runs $2,200 – $5,500, and HeatShield resurfacing for a liner repair is often $1,200 – $2,800. Rebuilds are priced higher depending on the masonry scope, with a full rebuild running $6,000 and up. The written estimate after our camera inspection sets the final price. Call (844) 526-7704 for an exact quote.
Yes, we work with DuraFlex flexible liner systems and Olympia Chimney products, along with HeatShield, Famco, Copperfield, and Gelco. We know where these systems tend to wear and what to check as they age. Whether your liner is one of these or another make, we can inspect and advise on it.
Same-day service is sometimes available, and we book jobs into the next opening when a slot fills. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 526-7704 and we’ll tell you what we can do.
Warranty coverage depends on the materials and the scope of the job, and we go over the specific coverage with your written estimate. Professional-grade materials like DuraFlex and HeatShield carry manufacturer terms, and our workmanship is backed per job. Ask us for the warranty details that apply to your estimate before work begins.
Clear the area around the fireplace and give us access to the chimney, attic, and roof as needed. Move anything breakable away from the work zone and keep pets and children clear while we’re on site. Beyond that, there’s nothing special to do; we handle the inspection, contain the work area, and clean up when we’re done.
Schedule Your Chimney Liner & Rebuild Service in Fox Chase Today
A failing liner or a crumbling crown is a problem you can see coming with the right inspection, and it’s a lot easier to fix before the masonry damage spreads. Call (844) 526-7704 to book a sweep or get a free, no-obligation estimate. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday. We’ll show you what we found and tell you straight what it takes to fix it.
Written by the team at Chimney Sweep Fox Chase.