Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Fox Chase
If your chimney cap is rusted through or the crown is shedding mortar, we can take a look and tell you what’s actually happening up there. Our chimney cap & crown work covers Fox Chase and the surrounding neighborhoods, and we know the housing stock here well: 1920s to 1950s brick singles and rowhouses with masonry chimneys that were built long before anyone was thinking about modern flue liners. The freeze-thaw winters and humid summers here are rough on original crowns and mortar joints, and it shows on a lot of the chimneys we inspect in Fox Chase.
The estimate is free, and we don’t recommend work you can’t see for yourself. Call (844) 526-7704. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Fox Chase Homeowners Call Chimney Sweep Fox Chase for Chimney Cap & Crown
Fox Chase chimneys are old enough that a cap or crown problem is rarely just a cap or crown problem. When we look at a chimney on one of these brick singles or rowhouses, we’re usually reading three things at once: the condition of the crown, the state of the flue liner underneath it, and whether the appliance venting into that flue was ever meant to be there. Our technicians have up to 9 years of experience with exactly this kind of stack, and that experience is the reason we start every cap and crown conversation with a camera, not a sales pitch.
The trade’s worst upselling happens on older chimneys, because the homeowner can’t see the flue and has no way to check the technician’s story. Our answer is simple: we show you the footage, we point at the crack or the spalling on screen, and we tell you plainly when something can safely wait. Nothing gets recommended without camera evidence you can see yourself.
We work with professional-grade materials, the same brands chimney specialists rely on: Olympia Chimney caps, Famco crowns and flashing, and DuraFlex flexible liner systems when a flue turns out to need relining before a new cap makes sense. Serving Fox Chase means working in tight rowhouse conditions where access and safety have to be coordinated, and we plan for that from the first visit.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Fox Chase
We handle cap and crown work as one connected job, because on Fox Chase’s older chimneys a new cap on a failing crown just traps water where it already pools.
Custom Cap Installation in Fox Chase
A stock cap rarely fits a Fox Chase chimney correctly. The flue sizes on these 1920s to 1950s masonry stacks often don’t match what’s on a shelf, so we measure the flue opening and have a cap fabricated to fit it properly. A well-fitted custom cap keeps rain, birds and downdrafts out while letting the flue breathe.

Cap Replacement in Fox Chase
Rusted-through caps are one of the first things we find on Fox Chase rowhouses. When the old cap has failed, we check the crown and flashing underneath before installing a new one, because a replacement cap bolted onto a crumbling crown just buys you a season or two.

Crown Repair in Fox Chase
Philadelphia’s freeze-thaw cycle cracks original brick crowns and loosens the mortar joints around them, and that’s where most of the water damage we see in Fox Chase starts. Crown repair rebuilds the sloped surface so water sheds away from the flue instead of running down into it. On a party-wall chimney, this work often means coordinating access with the neighbor, which we plan for up front.

Crown Coating in Fox Chase
When a crown is cracked but still structurally sound, a flexible crown coating can seal it and extend its life without a rebuild. We only recommend coating when the camera shows the crown is worth saving; if the mortar underneath is soft or the crown has separated from the flue, coating would hide a problem rather than fix it.
Multi-Flue Caps and Shared Chimneys in Fox Chase
The party-wall chimney is a Fox Chase specialty, and it’s the reason a simple cap replacement here can turn into a coordinated job. Many rowhouses on these blocks share a chimney with the neighbor, or have one built tight against the party wall, and that changes how you approach the top of the stack. Access is tighter, the cap may cover flues that serve two households, and flashing that gets disturbed on one side can leak on the other.
A multi-flue cap is usually the right answer on these shared stacks, but it has to be sized to every flue it covers, not just the one belonging to the person calling us. We look at the whole assembly, including how it ties into the masonry and the flashing, and we’re upfront when a job needs the neighbor involved before anyone touches the roof.
Trusted Brands We Service in Fox Chase
Cap and crown work holds up or fails on materials. We work with Olympia Chimney caps, Famco crown and flashing products, and Copperfield stainless caps, and we use DuraFlex liner systems when a flue needs relining before a cap goes back on. These are the same brands chimney specialists rely on, not big-box substitutes. We don’t claim to stock parts locally; we specify the right product for your chimney and keep turnaround reasonable by getting the order placed as soon as the inspection is done.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Fox Chase Homes
- Cracked and spalling clay tile liners. Original clay flue liners in these older Fox Chase homes crack and spall with age, letting water reach the crown from the inside and pushing mortar joints toward early failure.
- Retrofit appliances venting into undersized flues. Gas and wood-insert retrofits often vent into flues that were never designed for them, which causes draft problems and speeds up creosote buildup on the cap and crown.
- Party-wall and shared chimneys. On rowhouses, a cap replacement on one side can disturb flashing that serves both households, and improper flashing is one of the most common causes of water intrusion at the crown.
- Freeze-thaw damage to original brick crowns. Philadelphia’s winter cycling cracks mortar and opens joints on crowns that were built decades before modern sealants existed, and the long heating season means creosote keeps accumulating on caps that never get checked.
Pricing for Chimney Cap & Crown in Fox Chase, PA
Prices here reflect what the job actually involves on an older Fox Chase chimney, and we quote them in writing before any work starts.
| Service | Typical estimated range |
|---|---|
| Standard cap installation | $250 – $650 |
| Custom cap (fabricated to flue size) | $450 – $950 |
| Cap replacement | $300 – $700 |
| Crown repair (rebuild) | $400 – $1,100 |
| Crown coating | $300 – $650 |
| Multi-flue cap | $600 – $1,400 |
A typical custom cap in Fox Chase runs $450 – $950, and a crown repair typically runs $400 – $1,100. What moves the number is the flue count, the condition of the crown underneath, access on a shared rowhouse stack, and whether the camera inspection turns up a failed liner that has to be addressed first. If the inspection shows the cap and crown can wait, we’ll tell you that and put it in writing. The written estimate sets the final price.
We Also Serve Cities Near Fox Chase
We take cap and crown work in Cheltenham Village, Oxford Circle, Rhawnhurst and Rockledge, along with Fox Chase itself. The housing stock in these neighborhoods is similar enough that what we find on one chimney usually tells us what to look for next door. If you’re just outside Fox Chase, call and we’ll confirm coverage before booking.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Fox Chase
Sometimes, but on a shared chimney the cap often covers both flues, so replacing one side in isolation can leave the assembly leaking. We inspect the whole stack and the flashing where it meets the party wall, then tell you whether a partial replacement is safe or whether a multi-flue cap makes more sense for both households. Call (844) 526-7704 for an exact quote – estimates are free.
A crown needs coating when the surface is cracked but the mortar underneath is still sound, and repair when the crown has separated from the flue, gone soft, or lost its slope. We make that call from camera footage, not from looking up from the ground, so you see the same evidence we do. Call (844) 526-7704 to book an inspection and get a written estimate.
Rust-through on the cap, cracks along the seams, a cap that’s loose or tilted, and water staining on the smoke chamber after a storm are the usual signs in Fox Chase. The freeze-thaw cycle here widens small cracks each winter until the cap stops shedding water. If you’re seeing any of that, call (844) 526-7704 for an exact quote – estimates are free.
Yes, if the camera inspection shows the clay liner is still intact. If the tiles are cracked or spalling, a new cap would just cover a flue that’s letting water and creosote into the masonry, and we’ll show you the footage before recommending anything. Nothing is recommended without camera evidence you can see. Call (844) 526-7704 to schedule.
Because the worst upselling in this trade happens on older chimneys where the homeowner can’t see the flue. On Fox Chase’s original clay-tile and unlined flues, a technician can claim almost anything about the liner condition and you’d have no way to check. We put the camera on screen so the crack, the spalling, and the failed crown are your evidence, not our word. Call (844) 526-7704 for a free estimate.
If your cap is rusted, your crown is cracking, or you’re not sure what’s going on up there, call us at (844) 526-7704 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect the chimney, show you what the camera finds, and tell you what actually needs fixing and what can wait.
Written by the team at Chimney Sweep Fox Chase.