Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Fox Chase
If you’re in Fox Chase and there’s a crack in your chimney crown or a mortar joint letting water in, we can help. Chimney Sweep Fox Chase handles the full range of masonry and flue work on the older brick chimneys that define so many streets here, and we start every repair with a camera inspection so you can see exactly what’s going on inside your stack. Call (844) 526-7704 to book an estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm.
Why Fox Chase Homeowners Call Chimney Sweep Fox Chase for Chimney Repair
Fox Chase’s housing stock dates mostly from the 1920s through the 1950s, and that shapes every repair we quote. Many of these chimneys were built with clay-tile flues or no liner at all, and a lot of them now vent gas or wood-insert retrofits they were never designed for. When you call, we ask what the chimney looks like and how you heat, because “repair” means something different on an unlined 1930s stack than on a relined one.
We work with professional-grade materials, the same brands chimney specialists rely on: DuraFlex for flexible stainless relining, HeatShield for ceramic flue resurfacing, Copperfield and Gelco systems for the liner and cap assemblies that finish the job. That matters on these older brick chimneys. A patch that looks fine from the sidewalk can fail inside the flue, and the wrong material fails faster in a Philadelphia freeze-thaw winter.
You’ll also deal with the same people from the first sweep through a rebuild. That continuity is why homeowners here call us back year after year, and why we treat the inside of your chimney like it’s the only one we’ll look at today. No sales pitch, no guesswork: we tell you what we found, what it means, and what fixing it actually involves.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Fox Chase
The repairs we do most in Fox Chase fall into four buckets. Each one gets its own conversation, and none of them should be sold to you before you’ve seen the inside of your chimney.
Mortar Repointing
Repointing means cutting out the crumbling mortar between your bricks and replacing it with fresh material that bonds properly. On Fox Chase’s older brick, we often find joints that have weathered out after years of freeze-thaw cycles, letting water run behind the brick and soften the rubble core. A proper repointing job fixes the joints, not just the surface, and we don’t paint over a problem that needs mortar.

Spalling Brick Repair
Spalling is when the face of a brick flakes off, usually because trapped moisture freezes inside it and pushes outward. It’s common on these chimneys after a run of cold winters, and it can look alarming from the ground. We replace badly spalled brick and repair the ones that can be saved, then waterproof the stack so the cycle stops repeating. You’ll get a photo of what we found before we start.

Chimney Waterproofing
A lot of the damage we see on Fox Chase chimneys isn’t from the fire. It’s from water. A vapor-permeable water repellent on the brick stops rain from soaking in while still letting the masonry breathe, which is the right way to protect these older walls. We don’t use a sealer that traps moisture inside; that makes spalling worse.

Flashing Repair
Flashing is the metal that seals where your chimney meets the roof, and it’s the usual source of leaks that show up as stains on a ceiling or a wet spot in the attic. On Fox Chase rowhouses, flashing often needs to tie into the neighbor’s roof line, so we look at how it was integrated before quoting. If the flashing was never done right, we rebuild it to shed water away from the masonry line instead of trapping it.
Chimney Rebuilding
When the top of a chimney has lost too much brick and mortar, a partial or full rebuild makes more sense than patching it again. We rebuild from the roofline up, matching the brick and finishing with a crown that has the proper overhang and drip edge. We only recommend a rebuild when a repair genuinely won’t hold, and we show you why with photos.
Tuckpointing
Tuckpointing is the fine-detail version of repointing, working the joint to a clean, finished profile on the visible faces of the chimney. On older Fox Chase homes where the chimney is part of the front elevation, that finished look matters. We use the same mortar approach as a full repoint, just with more attention to the drawing of the joint.
Trusted Brands We Service in Fox Chase
When a repair calls for a liner or a flue surface, we work with brands we trust to hold up in this climate: DuraFlex flexible liners, HeatShield ceramic resurfacing, and Copperfield and Gelco components. We don’t stock parts, but those materials reach us quickly and we schedule the work around the material rather than rushing a substitute. That means you get the right system for your flue, not whatever happened to be on a truck. DuraFlex and HeatShield give us two proven routes to fixing a failing flue without tearing out the whole chimney, and we’ll tell you which one fits yours.
Common Chimney Repair Problems We See in Fox Chase Homes
- Crumbling crowns without a drip edge. Older brick chimneys here often have a crown that’s flat on top, so water runs straight down the stack and erodes the mortar joints below. It’s a quiet failure that’s easy to miss until the joint is gone.
- Clay-tile flues cracked by freeze-thaw. The flue tiles common in 1920s – 1950s Fox Chase homes spall and crack after repeated winters, and the damage is hidden behind the tile. A camera inspection is how you find it; the top of the stack rarely tells the story.
- Spalling brick and softened mortar joints. Water soaking into older brick freezes, expands, and pops the brick face off. Left alone, this works its way down from the crown toward the roofline.
- Flashed leaks at the party wall. On Fox Chase rowhouses, the flashing between your chimney and the neighbor’s roof can be the source of a leak that shows up inside your home. That’s a shared-masonry problem, not a roofing problem alone.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Fox Chase, PA
Every repair here is quoted per job by a written estimate, and that estimate is free. Here are typical ranges to give you a sense of the scale before you call. Masonry work on a Fox Chase chimney is estimated from $350 to $900 for mortar repointing and tuckpointing, depending on how much of the stack needs joints cut out. Spalling brick repair runs roughly $400 to $1,200. Chimney waterproofing is typically $250 to $500. Flashing repair sits around $300 to $750, and a roofline or full chimney rebuild starts near $1,800 and goes up from there on a larger stack.
What moves the number is access, the height of the chimney, and how much hidden damage a camera inspection turns up. If a repair can wait safely, we tell you that too. The written estimate sets the final price, and nothing gets recommended without evidence you’ve seen for yourself.
We Also Serve Cities Near Fox Chase
The same rowhouse-and-single housing and the same older chimneys show up all around us, so we regularly work in Cheltenham Village, Oxford Circle, Rhawnhurst, and Rockledge. If you’re a street or two over the Fox Chase line, the chimney construction is familiar to us and the repair approach is the same. Call (844) 526-7704 and we’ll confirm coverage for your address.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Fox Chase
Responsibility depends on where the shared chimney sits on the property line, and the written documents for your home usually answer it. If the stack is truly shared, both owners may each have a stake in the flue and the masonry above the roofline. We can tell you what we see from an inspection so you and your neighbor can work out who pays for what. Call (844) 526-7704 and we’ll walk you through what we find.
You can’t tell from the outside. A clay-tile flue from the 1940s can look intact at the top of the stack while gaps, cracked tiles, and missing mortar hide further down. A camera inspection is the only honest way to know, and we show you the footage so you’re judging the flue yourself, not taking our word for it. Call (844) 526-7704 to book an inspection.
Usually not. A crumbling crown and eroded joints are common on older Fox Chase chimneys and can often be fixed with a new crown and repointing rather than a full rebuild. A rebuild makes sense when the brick and core have lost too much to hold a repair. We measure how far the damage goes before recommending either, and we’ll tell you when a smaller fix will last. Call (844) 526-7704 for an estimate.
Third-degree creosote is the hard, glazed form that bonds tightly to the flue and is the toughest to remove; it’s also tied to chimney fire risk. It builds up in wood-burning flues, which is a real concern in Fox Chase given how long the heating season runs. We inspect the flue, remove what a sweep can, and tell you if a liner or resurfacing is the safer path. Call (844) 526-7704 for an inspection.
Often yes. Fox Chase rowhouses frequently share a chimney stack or have one built tight against the party wall, so any repair that needs access above the roofline or scaffolding means coordinating with the neighbor. That step is common here in a way it isn’t in detached suburban housing, and we plan it into the schedule. Call (844) 526-7704 and we’ll tell you what access your repair will need.
Book Your Chimney Repair in Fox Chase
Whether it’s a crumbling crown, spalling brick, or a flue you’re not sure about, the first step is a camera inspection and a written estimate you can read before you commit to anything. We’ll show you what we found, explain what a repair involves, and tell you plainly if it can wait. Call (844) 526-7704 for a free estimate. We answer 24/7, fast dispatch runs from 7am to 7pm, and we’re glad to work through the details of a shared stack with you and your neighbor.
Written by the team at Chimney Sweep Fox Chase.