Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Roxborough?
Chimney cleaning in Roxborough typically costs $150 to $290 for a standard sweep of a fireplace flue, and most homes land near the middle of that range. Add a camera inspection and you’re usually looking at $250 to $420 total. If the sweep turns up a cracked flue or heavy creosote, the written estimate you get afterward is what sets the final price on any repair work.
We give you a straight number before we start, not after. Call (844) 526-7704 for a free estimate. We answer 24/7 and offer fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Cleaning Cost Breakdown (2026)
These are typical estimates for the Roxborough market this year. Every job gets its own written estimate, and that document is what you actually pay.
| Service | Typical Price Range | What It Covers |
|---|---|---|
| Standard chimney sweep (fireplace flue) | $150 – $290 | Rod-and-brush cleaning, creosote removal, basic visual check |
| Sweep with camera inspection | $250 – $420 | Sweep plus video scan of the flue to spot cracks and gaps |
| Wood stove or insert flue sweep | $190 – $340 | Steeper or offset flue, often heavier creosote buildup |
| Heavy creosote removal (stage 3) | $300 – $650 | Glazed creosote that needs chemical treatment and extra passes |
| Chimney cap installation | $180 – $400 | Stainless or galvanized cap sized to your flue |
| Crown repair or rebuild | $350 – $1,100 | Sealing hairline cracks up to pouring a new crown |
| HeatShield flue resurfacing | $1,200 – $2,600 | Ceramic resurfacing of a deteriorating liner without full replacement |
| DuraFlex stainless liner installation | $2,400 – $5,200 | Flexible stainless relining of an existing masonry chimney |
The sweep itself is the small line. What moves the number is what we find once we’re inside. A flue full of glazed creosote takes longer and needs chemical treatment. A cracked liner turns a cleaning into a repair conversation. A missing cap means water’s been getting in, and that usually shows up as a crown or flashing problem. None of that is upsell talk; it’s what the camera shows. You get the findings, the meaning, and the cost of fixing it in plain language before any work starts.
What Affects Chimney Cleaning Pricing in Roxborough
Roxborough’s housing stock drives most of the variation. The neighborhood is full of older rowhouses and twins along Ridge Avenue and down toward Manayunk, plus a lot of century-old stone and brick homes on the side streets. Those chimneys were built for coal and later converted, and the flues inside them are rarely straight or clean.
- Flue condition and creosote stage. Light soot sweeps out quickly. Glazed, tar-like creosote is a different job that needs chemical treatment and multiple passes, which pushes the price toward the top of the range.
- Chimney age and construction. A brick chimney on a 1920s Roxborough twin often has cracked mortar joints and a flue that’s shifted. The sweep itself doesn’t change much, but the inspection findings usually do.
- Access and roofline. A chimney on a steep slate roof or tucked behind a dormer takes longer to reach and set up on safely. Flat access from a lower roof keeps labor down.
- Number of flues. A chimney serving a fireplace plus a furnace has two flues, and both need cleaning. That roughly doubles the sweep time.
- Wood stove or insert vs. open fireplace. Stoves and inserts burn hotter and build creosote faster, and their flues are often offset or lined, so the sweep runs higher.
- Whether you add an inspection. A camera scan adds cost but catches problems a brush can’t, and it’s the difference between a cleaning and a proper diagnosis.
We handle the full picture under one roof, from the sweep through chimney sweep fox chase services and repair, so you’re not coordinating a cleaner, a mason, and a liner guy for one chimney.
What Usually Turns Up in Roxborough Chimneys
Most Roxborough calls start as an annual cleaning and end with a short list. The brick chimneys common here take a beating from freeze-thaw cycles. Water gets into hairline cracks in the crown, freezes overnight, expands, and widens them. By the time it’s visible from the ground, the crown is usually spalling. That’s why our chimney cap and crown work is often the first repair we recommend after a sweep. A cap keeps rain and animals out, and a sound crown keeps water from working down into the masonry.
Inside the flue, the story is often a clay tile liner with cracks or gaps, especially on older homes where the liner was never sleeved. A deteriorated liner lets heat and creosote reach the surrounding wood framing, which is the real safety concern. On some flues, a full liner replacement isn’t the only answer: our chimney liner installation and rebuilding work includes HeatShield ceramic resurfacing, which restores a failing liner without tearing it out. That’s a solution most sweep-only outfits can’t offer, and it’s a big part of why we keep HeatShield in the toolkit.
When a full liner is the right call, we install DuraFlex flexible stainless systems, which let a code-compliant flue be relined inside the existing masonry. We work with professional-grade brands like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because those are the materials chimney specialists actually rely on, not big-box substitutes. From your first sweep to a full rebuild, one company handles it.
A word on safety, and we mean this plainly. The inside of a chimney, the flue, and roofing at height are genuinely dangerous places to work, and the tools and techniques involved in a proper sweep are not a homeowner project. Leave the brush, the camera, and the roof to a trained technician. Our technicians have up to 9 years of experience, and the local pro we connect you with is licensed and insured as their state requires.
How to Save on Chimney Cleaning
The single biggest saver is a clean-burning fire. Seasoned hardwood, a hot fire, and an open damper reduce creosote buildup, which keeps you in the standard sweep range instead of the heavy-creosote range. Burning green or unseasoned wood is the fastest way to turn a $200 cleaning into a $500 one.
- Get the estimate in writing, up front. A written estimate means the price doesn’t drift once the work starts. Ours is free.
- Combine the sweep with the inspection. Catching a hairline crack during a cleaning beats discovering it after water damage. Catching it early is what keeps repair costs down.
- Fix the cap before the crown. A cap is the cheapest way to stop water from getting in and starting the freeze-thaw cycle. That’s a small line item now that prevents a bigger one later.
- Stay on an annual schedule if you burn regularly. A yearly sweep is cheaper than the repair that follows a neglected flue. Skip it and you’re paying for the cleanup, not the maintenance.
- Ask what the visit actually includes. A sweep that skips the inspection can leave a problem undetected. Know what you’re paying for.
Call (844) 526-7704 for a free estimate. We tell you what we found, what it means, and what fixing it actually involves. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Repair or Replace: What the Numbers Say
A sweep is maintenance; a repair is a fix; a rebuild is a decision. Most Roxborough homeowners face the repair-or-replace question on the liner, not the masonry. A cracked clay tile liner with sound surrounding brick is usually a HeatShield resurfacing job, in the $1,200 to $2,600 range. A liner that’s collapsed, heavily damaged, or too far gone for resurfacing typically needs a full DuraFlex stainless liner, in the $2,400 to $5,200 range. The cheaper option isn’t always the right one, and a proper camera inspection is what tells you which situation you’re in.
When the masonry itself is failing, a partial rebuild of the damaged section often makes sense before a full rebuild does. Either way, you’re getting a diagnosis tied to what we can see, not a sales pitch. Chimney work done to last and patched until next season are not the same thing, and we won’t pretend they are.
Why Roxborough Homeowners Call Us for More Than a Sweep
A cleaning is usually the easy part. The reason homeowners keep calling back is that a sweep is only useful if whoever does it can also handle what comes next. We cover five service areas: chimney sweeping, chimney cap and crown work, chimney repair, chimney liner installation and rebuilding, and fireplace repair. That means the flue problem and the fireplace problem get solved in one relationship instead of three.
Fireplace repair is the one homeowners forget to ask about until it’s cold. A damper that won’t seal, a firebox with cracked brick, a smoke chamber that drafts poorly; these connect directly to the chimney system and get handled by the same company. Our chimney repair work ties the whole system together, from the cap at the top to the firebox at the bottom. When you call chimney sweep fox chase for a cleaning, you’re getting a technician who can look at the full system, not a brush on a pole.
We don’t dress it up: the reason to keep up with a chimney is safety, and the reason to do it right is that patchwork fails. We use the same professional-grade materials the trade relies on, and we tell you exactly what we found before we quote a fix.
FAQs – Chimney Cleaning Cost
How much does chimney cleaning cost in Roxborough?
A standard fireplace flue cleaning typically costs $150 to $290 in Roxborough. Add a camera inspection and expect $250 to $420. The written estimate sets the final price. Call (844) 526-7704 for an exact quote, and estimates are free.
Is a chimney cleaning cheaper if I book it with a repair?
Combining services on one visit is often less expensive than booking two separate trips, because the travel and setup happen once. A sweep with a cap installation is typically $330 to $690 combined rather than two separate visits. Call (844) 526-7704 to see what makes sense for your chimney.
How often does a Roxborough chimney need cleaning?
Annual cleaning is the general recommendation for a flue you burn in regularly, and many homes where the fireplace is used a few times a week fall in the standard $150 to $290 range each year. Homes pushed hard through cold winters may need it checked sooner. Call (844) 526-7704 to book an inspection.
Why does heavy creosote cost more to clean?
Glazed creosote needs chemical treatment and multiple passes, which typically runs $300 to $650 instead of a standard sweep. It’s a different job, not a pricier version of the same one. Call (844) 526-7704 for an estimate.
Can you come today?
Same-day service is often possible on shorter-notice calls. Sweep pricing stays in the $150 to $290 range; the price is set per job by the written estimate, not by how soon we arrive. Call (844) 526-7704. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Book a Chimney Cleaning in Roxborough
Get your chimney on a proper schedule and you’ll spend less over the years than you will fixing what a skipped cleaning leaves behind. We give free estimates, tell you what we found in plain terms, and set the final price in writing before anyone picks up a brush. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Call (844) 526-7704 for your free estimate and get your Roxborough chimney looked at properly.
Written by the team at Chimney Sweep Fox Chase.
Pricing reflects the Roxborough market as of 2026. Chimney Sweep Fox Chase offers free estimates – call (844) 526-7704.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Adam Sullivan"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Jennifer Norris"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Kurt Novak