Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Rhawnhurst, PA
We service Gelco chimney components across Rhawnhurst as an independent shop, and what sets our work apart here is simple: on this housing stock, we inspect all the flues before touching a Gelco cap or damper. Most of these chimneys have two or three flues from their oil-and-coal days, and the unused ones are usually wide open. We map the system first, then clean, line, cap, or rebuild based on what’s actually there. Call (844) 526-7704 for a free estimate.

Why Rhawnhurst Residents Choose Us for Gelco Service
Gelco gasketed and insulated components show up regularly in Northeast Philadelphia rowhouses after oil-to-gas conversions, and we’ve handled enough of them to know their habits. Our technicians have up to 9 years of experience with Gelco caps, dampers, liners, and crown coatings in exactly this kind of housing.
We’re not affiliated with Gelco. We’re an independent provider, and that matters: our job is to fix what’s failing on your chimney, not to sell you a brand. Quality parts that fit your flue size and appliance type guide every repair.
What you’ll get from us in Rhawnhurst is straight scheduling and a clear explanation of what we found. We tell you what the inspection shows, what it means, and what the fix actually involves. No guessing, no upselling you a liner you don’t need. Our technicians have spent real hours on Rhawnhurst rooftops, and it shows in how we work.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Rhawnhurst
- Loose multi-flue cap legs. Gelco multi-flue caps on Rhawnhurst twins often have mounting legs that loosen after freeze-thaw cycling. Once the legs work free, rain gets into unused flues and starts breaking down the original clay tile.
- Seized top-mount dampers. Gelco top-mount dampers in underused gas fireplaces can seize from humid summer air. This hits hardest where a flue was originally sized for oil and now runs a smaller gas appliance, leaving the oversized flue to collect moisture.
- Liner joint separation at the connector. Older Gelco flexible liners installed during oil-to-gas conversions can develop joint separation at the appliance connector. This is a common finding when the original terra-cotta liner was oversized and the newer liner had to bridge a gap it wasn’t fitted for.
- Failed crown coatings. Gelco crown coatings applied over unprimed, spalled mortar on exterior chimneys fail within a few winters. Moisture pushes the coating right off the brick face once spalling starts underneath.
- Uncapped unused flues. Two or three flues serving separate original furnaces, water heaters, and fireplaces means the unused ones sit open to rain, nesting birds, and squirrels. That’s often the root cause behind the cap and damper failures above.
Gelco Service in Rhawnhurst: What Local Conditions Mean for Your Equipment
Here’s the thing about Rhawnhurst that changes how Gelco work actually gets done. Many chimneys here have two or three flues serving separate original oil furnaces and water heaters, and the unused flues are typically uncapped. So when we install a Gelco multi-flue cap, we can’t just measure the top and set a cap. We have to map which flue serves which appliance first. A cap sized for the wrong opening, or one that leaves an original flue unsealed, just resets the same problem you called about. The chimneys along Cottman, Castor, and Bustleton avenues were built between the 1940s and 1960s with exterior masonry and original clay-tile liners. Most have never been relined. When repeated freeze-thaw cycles spall the crown and the open flues pull in rain, the whole system deteriorates faster than the homeowner expects. Getting the cap right, with the right opening mapped to the right appliance, is what stops that cycle.
Gelco Models & Products We Service in Rhawnhurst
Our work covers the Gelco components that show up on Rhawnhurst chimneys: multi-flue caps, top-mount damper systems, stainless steel flexible liner kits, and chimney crown coatings. Each one gets matched to your existing flue size and appliance type before anything is installed or replaced.
When your original Gelco cap or damper is identifiable, we prefer OEM Gelco parts to keep the fit right. For relining, quality aftermarket stainless liners and clamps are common and just as reliable. We decide repair versus replacement based on the clay tile and crown: one cracked tile can often be spot-relined, but a spalled crown with multiple open flues usually means full cap replacement and a crown rebuild. We use the same professional-grade brands specialists trust, including Gelco and the other names in our toolkit. If you want the older liner system looked at, we also offer Gelco service by product type.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Rhawnhurst
Pricing here depends on what the inspection turns up. A straightforward cap repair or reseal is a smaller job than a full multi-flue cap with a crown rebuild, and the flue mapping adds time when the chimney has multiple original openings. Without a look, no honest number exists.
| Service | Typical Estimate |
|---|---|
| Cap reseal or leg repair | $150 – $300 |
| Gelco multi-flue cap installation | $400 – $900 |
| Crown repair or coating | $350 – $800 |
| Level 2 inspection with flue mapping | $200 – $400 |
| Stainless flexible liner reline | $1,800 – $4,500 |
These are estimates based on typical Rhawnhurst work. The written estimate you get after inspection sets the final price. Call (844) 526-7704 for a free estimate.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Rhawnhurst
My Rhawnhurst rowhouse has a Gelco multi-flue cap that is loose after this winter – can it be repaired or does it need replacement?

Most loose caps can be repaired if the cap body is intact and only the mounting legs have worked free. If the legs are rusted through or the crown underneath has spalled, replacement makes more sense. We check the crown and cap together before deciding. Call (844) 526-7704 for a free estimate.
How do I know if my Gelco top-mount damper is causing my gas fireplace to draft poorly?
If your fireplace smokes or struggles to draw, a seized top-mount damper is a common cause, especially in a flue that was originally sized for oil and now serves a smaller gas appliance. We test the damper movement and check for moisture seizure before recommending any repair.
Does a Gelco flexible liner need to be replaced when my Rhawnhurst chimney has multiple original flues?
Only the flue serving the active appliance usually needs relining; the others get capped and sealed. We map each flue to its appliance first so the liner goes where it’s needed and nothing else gets disturbed.
Why do Gelco crown coatings fail so quickly on exterior chimneys in Northeast Philadelphia?
Repeated freeze-thaw cycles spall the mortar underneath the coating, and once that starts, moisture pushes the coating off the brick. Proper surface prep and a crown repair underneath make the coating last.
Can a Gelco multi-flue cap keep squirrels and birds out of the unused flues in my 1950s twin home?
Yes, a correctly sized cap seals every flue opening against weather and nesting animals. The key is sizing it to all the openings after mapping which flue serves which appliance. Call (844) 526-7704 for a free estimate.
Service Areas Near Rhawnhurst
We also serve homeowners in Fox Chase, Oxford Circle, Chestnut Hill, Roxborough, Manayunk, and Upper Moreland. If you’re near any of these and need Gelco caps, dampers, or liners looked at, give us a call.
Book Your Gelco Service in Rhawnhurst Today
Give us a call at (844) 526-7704 to book a free estimate on your Gelco chimney cap, damper, liner, or crown work. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect, map the flues, and give you a written estimate before any work begins.
Written by the team at Chimney Sweep Fox Chase.