Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Fox Chase Homeowners
Fox Chase houses were built to hold heat, and most of them lean on a fireplace or wood stove to do part of that job through the winter. That works well until the masonry starts to give: a crown that’s cracked and letting water in, mortar joints that have gone soft, bricks that are flaking off the face. Chimney repair fixes those problems at the source instead of patching over them. Our technicians have up to 9 years of experience reading masonry and flue damage, and we bring the same professional-grade materials that trade specialists rely on: HeatShield ceramic resurfacing for flue liners, DuraFlex stainless liners when relining is the only honest answer, and Olympia Chimney and Copperfield components for caps and terminations.
We tell you what we found, what it means, and what fixing it actually involves. No pressure to move to a rebuild when repointing will do. If you need someone out soon, we can often arrange same-day repair visits in Fox Chase around our dispatch schedule. Call (844) 526-7704 and we’ll set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Chimney Repair Service Includes
Chimney damage in this part of Pennsylvania almost always comes back to water. Freeze-thaw cycles open hairline cracks, water gets in, and the next cold snap pushes the masonry apart from the inside. Each of the repairs below addresses a different stage of that process, and we’ll tell you which one your chimney actually needs.
Mortar Repointing
Repointing means cutting out the old, crumbled mortar from the joints between bricks and packing in fresh mortar that bonds properly to both. You need it when the joints have receded or turned sandy and can be scraped out with a fingernail. We match the mortar mix to the brick so the repair doesn’t cause spalling later, which happens when a hard modern mortar is forced against soft old brick.

Spalling Brick Repair
Spalling is when the face of a brick peels, flakes, or pops off entirely, usually after water has soaked in and frozen behind it. It’s a structural warning, not a cosmetic one, because each spalled brick is a little weaker and the ones around it take on more load. We replace the damaged bricks with matching units and address the moisture source that started the problem, because new brick in a wet chimney will spall too.

Chimney Waterproofing
Waterproofing is a breathable sealant applied to the masonry that keeps liquid water out while letting vapor escape from inside. It’s the right call once the masonry is sound and repointed, and it’s the cheapest way to slow down the deterioration that leads to bigger repairs. We only apply it after the brick and mortar are in good condition, since sealing over active damage traps moisture rather than protecting against it.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s the number one source of chimney leaks we find. When the flashing pulls away, rusts through, or was never installed with proper step and counter-flashing, water runs straight down the chimney chase and into the house. We rebuild the flashing layers correctly and seal the joints so the roof-to-chimney transition sheds water the way it should.
Chimney Rebuilding
A rebuild is for chimneys where the damage has gone past repair: sections where the brick has lost its structural integrity, or a stack that’s leaning because the foundation or the upper courses have failed. We tear down only what needs to come down, rebuild with new brick and mortar to match, and reset the crown and cap. This is the largest repair we do, and we only recommend it when repointing or resurfacing genuinely won’t hold.
Tuckpointing
Tuckpointing is a refined form of repointing where a finished mortar line is worked into the joint for a cleaner, more uniform look, often used on visible chimneys where appearance matters. You’d choose it when the mortar needs replacing and you want the finished chimney to look right from the street or the patio. We grind out the old mortar to a consistent depth and tool the new joints so they weather evenly.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
We work with Olympia Chimney components regularly, particularly their caps and terminations, and we know where those assemblies tend to wear. Olympia products hold up well, but the fasteners and the sealant lines around them are the first things to fail, and that’s usually what we’re repairing when a homeowner calls about water coming down the flue. We also work with Copperfield flashing and cap systems, which means we’re not guessing at how those pieces fit together when we replace or reseal one.
On the flue side, we use HeatShield ceramic resurfacing for liners that have deteriorated but don’t yet need full replacement, and DuraFlex flexible stainless liners when a reline is the right answer. That combination matters for repair work, because it lets us fix a failing liner without tearing out a chimney that’s otherwise sound. Whether you have Olympia Chimney, Copperfield, or any other make on your chimney, we can help.
Signs You Need Chimney Repair Right Now
- Crumbling mortar or loose bricks. If you can scrape mortar out of the joints with a screwdriver, or a brick rocks when you press it, the chimney has lost structural integrity. That’s the stage where repointing is cheap and a rebuild is expensive, so it’s worth getting eyes on it soon.
- Water stains or white chalky deposits on the masonry. That white powder is called efflorescence, and it means water is moving through the brick and drying out on the surface. It’s the clearest early sign of a chimney that’s taking on water and needs waterproofing or flashing work.
- Rust on the damper or firebox. Rust indoors means moisture is getting into the chimney from outside, usually through a bad crown, cap, or flashing detail. Left alone, that moisture works its way into the flue liner and the framing around the chimney.
- A cracked or crumbling crown. The crown is the concrete cap on top of the stack, and it’s meant to shed water away from the masonry. Once it cracks, water runs straight down into the brick, and crown repair is one of the least expensive fixes on this list.
- Pieces of brick or mortar on the roof or in the firebox. Falling debris means something above is failing, and it’s worth a look before the next storm takes more of it down. We’ll assess it and tell you plainly if it can wait for spring.
Our Chimney Repair Process – Step by Step
- 1
We inspect the whole system, not just the visible problem. A repair based on what you can see from the ground is a guess. We look at the crown, the flashing, the brick and mortar, the flue interior, and the firebox, and we take photos as we go so you’re seeing what we’re seeing.
- 2
We explain what we found and what it means. You get a plain account of the damage, the cause behind it, and the realistic options, along with which repairs can safely wait a season and which shouldn’t. We don’t recommend work we can’t back up with evidence you can look at yourself.
- 3
You get a written estimate before anything starts. The estimate covers the materials and labor for the specific repair, and the price is set per job by that written estimate. Nothing gets added on after the fact.
- 4
We do the work with professional-grade materials. That means mortar matched to your brick, HeatShield or DuraFlex for liner issues, and Olympia Chimney or Copperfield components where caps, flashing, or terminations are involved. We protect the roof and the surrounding area while we work.
- 5
We walk the finished job with you and leave the photos. You see the completed repair, the materials used, and the condition of everything we touched. If something needs watching over the next year, we tell you what to look for.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Fox Chase?
Chimney repair in Fox Chase typically runs from a few hundred dollars for a crown repair or small flashing fix up to several thousand for a partial rebuild, depending on how far the damage has gone. Tuckpointing and mortar repointing are usually the moderate-priced repairs, since they’re labor-intensive but use inexpensive materials. Waterproofing is one of the lower-cost items and one of the best returns, because it protects everything else. Flashing repair sits in the middle, and it’s often the fix that stops a leak that’s been blamed on the flue.
| Repair | Typical Estimated Range |
|---|---|
| Crown repair or rebuild | Lower hundreds |
| Chimney waterproofing | Lower to mid hundreds |
| Flashing repair or replacement | Mid hundreds |
| Mortar repointing / tuckpointing | Mid hundreds to low four figures |
| Spalling brick replacement (partial) | Mid hundreds to low four figures |
| Partial chimney rebuild | Low to mid four figures |
What affects the price: the height and accessibility of the chimney, how much of the stack is involved, whether a scaffold or lift is needed, and whether the repair uncovers a liner problem underneath. How to avoid overpaying: get a written estimate that names the specific repair, not a vague “chimney work” line, and ask whether anything can safely wait. A free estimate from us includes the inspection, the photo report, and the written price. We don’t quote off a glance from the driveway.
Chimney Repair Near Fox Chase – Our Service Area
We handle chimney repair throughout Fox Chase and the surrounding communities, including chimney repair in Chestnut Hill, Upper Moreland, Roxborough, Manayunk, and Ambler. Most of the work we do is within a short drive of Fox Chase, so scheduling is straightforward and same-day visits are often possible depending on the day’s route. If you’re not sure whether you’re in our area, call and we’ll tell you straight. We also cover repair work in Upper Dublin, Warminster Heights, and Maple Glen.
For the full range of what we do, start with our Chimney Sweep Fox Chase page, or read more about chimney repair in Upper Moreland.
Serving Fox Chase, PA – Our Local Coverage Area
We serve Fox Chase and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Fox Chase
Chimney repair covers the work that fixes damage to the chimney structure and flue: repointing mortar, replacing spalled brick, rebuilding a crown or the upper stack, repairing flashing, waterproofing the masonry, and resurfacing or relining the flue. It’s distinct from a chimney sweep, which clears creosote and soot from a chimney that’s otherwise sound. Most chimneys we inspect need a specific repair, not a full overhaul, and our job is to identify which one.
Most chimney repairs take a single visit, generally a few hours for repointing, crown work, or flashing. Tuckpointing and waterproofing are typically done in a day, while a partial rebuild can run several days depending on scope and weather. We’ll give you a realistic timeline with the written estimate so you know what to plan for.
Most chimney repairs in Fox Chase fall between the mid hundreds and the low four figures, with waterproofing and crown work near the low end and partial rebuilds at the high end. The exact price depends on the height and accessibility of the chimney and how much masonry is involved. Call (844) 526-7704 for an exact quote, estimates are free.
Yes. We work with Olympia Chimney caps and terminations and Copperfield flashing and cap systems regularly, and we know where those assemblies tend to fail. Whether your damage is at the cap, the flashing, or the flue, we can assess and repair it. If you have a different make on your chimney, we can still help.
Same-day repair visits in Fox Chase are often possible, depending on the day’s schedule and the scope of the repair. Call (844) 526-7704 and we’ll give you the earliest opening. We answer 24/7; a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Our repair work is done with professional-grade materials and backed by a workmanship warranty on the repairs we perform. The specifics depend on the type of repair, and we’ll spell them out in the written estimate before you agree to anything. If something we fixed acts up, call us and we’ll come back out.
Clear access to the fireplace and the roof route, if possible, and move anything breakable away from the hearth. If you have pets, keep them out of the work area, since we’ll be moving tools and materials through the house. Point out any leaks or stains you’ve noticed so we can trace them back to the source.
Schedule Your Chimney Repair Service in Fox Chase Today
Water damage doesn’t fix itself, and a small repointing job is a lot cheaper than a partial rebuild once the freeze-thaw cycle has done its work. Call (844) 526-7704 to set up a free, no-obligation estimate for chimney repair in Fox Chase. We’ll inspect the whole system, show you the photos, and tell you what actually needs doing. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fox Chase.