Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Rhawnhurst, PA
We provide independent HeatShield flue resurfacing across Rhawnhurst, PA. What sets our HeatShield work apart here is the housing itself: most of Rhawnhurst’s rowhouses and twins were built with flues sized for oil or coal, and modern gas appliances leave those old clay liners oversized and often cracked. HeatShield is one of the few fixes that restores a deteriorating flue without tearing out the original masonry. Our technicians have up to 9 years of experience, and we install HeatShield liners ourselves. Call (844) 526-7704 for a free estimate.

Why Rhawnhurst Residents Choose Us for HeatShield Service
We work with HeatShield flue lining systems every week, so we know how the cementitious liner behaves in the aging exterior masonry common along Cottman, Castor, and Bustleton avenues. That knowledge comes from hands-on installation and repair, not from any manufacturer authorization or partnership. Chimney Sweep Fox Chase is an independent HeatShield service provider, and we’re upfront about that.
The payoff for you is a straight read on your flue before anyone starts work. We run a Level 2 inspection with video scanning, show you the footage, and explain in plain terms whether the existing terra-cotta liner can be resurfaced or needs a full replacement. When we do use HeatShield, we use HeatShield OEM components so the repaired liner is compatible with what’s already in your chimney.
We also handle the rest of the system in one visit relationship: sweeping, cap and crown work, chimney repair, liner installation and rebuilds, and fireplace repair. No juggling three contractors. And because we work in Rhawnhurst rowhomes regularly, we understand the tight side yards and shared walls that shape how this work gets done.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Rhawnhurst
- Cracked or spalled HeatShield lining on exterior chimneys. Northeast Philadelphia winters cycle between freeze and thaw, and the exposed masonry on Rhawnhurst twins takes the worst of it. Repeated cycles push moisture into the liner surface, and over time the resurfaced face cracks and spalls.
- Liner separation from the original terra-cotta flue. Humid summers here are hard on the bonding layer between a HeatShield lining and the old clay tile it sits against. When that bond degrades, the lining can pull away and create gaps that let combustion gases escape.
- Improperly sized HeatShield liners. We see resurfaced liners installed in flues that were oversized from the start – common in older Rhawnhurst chimneys – which leaves poor draft and lets creosote build up faster than the flue can clear it.
- Corrosion and deterioration in unused flues. Many Rhawnhurst chimneys have a dormant flue left uncapped and open to rain and nesting animals. Moisture and debris break down a liner that was fine a few seasons back.
- Creosote buildup above the lining. Resurfacing doesn’t replace sweeping. When a liner is installed but the flue above isn’t kept clean, creosote keeps accumulating and draft complaints return.
HeatShield Service in Rhawnhurst: What Local Conditions Mean for Your Equipment
Here’s the local reality that shapes most of our HeatShield work. Rhawnhurst rowhomes often have two or three flues serving separate original oil furnaces, water heaters, and fireplaces, and many of those unused flues sit uncapped. Water gets in. Birds and squirrels get in. The liner deteriorates quietly whether or not anyone is using that flue. That’s why a Level 2 inspection with video scanning comes before any HeatShield lining job – we can’t responsibly resurface a flue without knowing what’s inside it. In a typical Rhawnhurst rowhome, a homeowner books a cleaning after noticing draft trouble or debris at the damper. The technician finds a cracked terra-cotta liner in one of the retired flues, open to the weather for who knows how long. After the inspection, the usual fix is to clear the debris, repair the crown, and install a HeatShield liner so the flue is sealed and sized correctly for what serves it now. Cap installation on those unused flues stops the cycle from starting again.
HeatShield Models & Products We Service in Rhawnhurst
We service and install the HeatShield flue resurfacing systems that fit the older masonry chimneys around Rhawnhurst. That includes HeatShield Model 100, Model 200, Model 300, and the HeatShield Custom Liner, each suited to a different flue condition and diameter. Which one belongs in your chimney depends on the inspection: the size of the original terra-cotta liner, the shape of the flue, and how much of the existing surface is sound enough to bond to. We choose HeatShield OEM components for repairs and installations, which keeps compatibility and performance predictable. We’re an independent shop, not a HeatShield dealer, so our recommendation rests on what your flue actually needs. If a liner is too far gone to resurface, we’ll tell you that instead of patching it.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Rhawnhurst
HeatShield resurfacing is priced per job, quoted in writing before any work begins, and the estimate is free. The main cost drivers are the number of flues being addressed, the length and diameter of the flue, the extent of damage found during the inspection, and whether cap or crown repairs are needed at the top. For Rhawnhurst rowhomes with two or three flues, we quote each flue separately so you can decide what to do now and what can safely wait. A free estimate includes the Level 2 inspection review, the video footage so you can see the condition for yourself, and a written scope with the price. If something isn’t urgent, we’ll say so plainly. Call (844) 526-7704 to book yours.
Serving Rhawnhurst, PA – Our Local Coverage Area
We serve Rhawnhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Rhawnhurst
You need one when the existing terra-cotta liner is cracked, spalled, or too large for the appliance it serves – something a Level 2 inspection with video scanning confirms. We show you the footage so the decision isn’t guesswork. Book a free estimate at (844) 526-7704.
Yes, in many cases they can. Those original oil flues are often oversized for a modern gas appliance, and HeatShield can bring the flue back to a size that drafts properly. Whether resurfacing is right for a particular flue depends on the condition found during inspection.
Because many of these flues were retired without a cap, leaving an open chimney top that birds and squirrels treat as shelter. A cap installation closes that opening. It’s one of the simplest things we do, and it protects the liner from rain and nesting damage.
It starts with a Level 2 inspection and video scan, then debris removal, crown repair if needed, and resurfacing or lining of the flue with HeatShield materials. We finish with cap installation to close off anything unused. Call (844) 526-7704 for a free estimate on your rowhome’s flues.
Yes. Flues are lined and evaluated individually, which matters in Rhawnhurst where rowhomes often have two or three separate flues. We quote and inspect each one, so a healthy flue doesn’t get bundled into work it doesn’t need. Call (844) 526-7704 for an exact quote – estimates are free.
Service Areas Near Rhawnhurst
Our HeatShield work reaches homeowners across Northeast Philadelphia and the surrounding neighborhoods. Along with Rhawnhurst, we serve Fox Chase, Chestnut Hill, Upper Moreland, Roxborough, and Manayunk, plus Oxford Circle when the work calls for flue resurfacing or liner repair. If you’re just outside these areas, call and we’ll tell you whether we can reach you.
Book Your HeatShield Service in Rhawnhurst Today
If your flue is drafting poorly, your chimney has an uncapped flue, or you’ve been told your liner needs work you can’t verify, get a second look with video evidence. Call (844) 526-7704 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Fox Chase.