Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Upper Moreland
If your fireplace has started smoking back, your damper won’t seat right, or there’s a rust streak running down the chase, you’re likely looking at liner or rebuild work, not another cleaning. In Upper Moreland that call usually starts with a closer look at what’s behind the brick. This page explains how we handle chimney liner and rebuild work here, from a first inspection through a finished stainless or resurfaced flue, and why Upper Moreland chimneys so often need more than a standard sweep. Call (844) 526-7704 to book an inspection.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
Why Upper Moreland Homeowners Call Chimney Sweep Fox Chase for Chimney Liner & Rebuild
The calls we get from Upper Moreland tend to sound alike. A homeowner has used the fireplace as supplemental heat since October, notices a stain or a draft, and assumes a cleaning will sort it out. When a technician pulls the cap, the story changes: a cracked clay flue, glazed creosote, spalling joints, a crown that’s been letting water in.
What separates a liner job from a rebuild is evidence, and that’s what we bring. A camera goes down the flue and we show you what it sees, so nothing gets recommended that you can’t verify on the screen yourself. If the liner is sound and only needs sweeping, we’ll tell you that. If the flue is shot, we’ll show you where and explain what fixing it involves.
Our technicians have up to 9 years of experience with the materials this work actually requires: DuraFlex flexible stainless for relining, HeatShield ceramic resurfacing for flues that don’t need a full liner replacement, and the masonry side of a partial rebuild when a chase or crown has gone. We work with professional-grade brands, not big-box substitutes. From your first sweep to a full rebuild, one company handles it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Liner & Rebuild Services in Upper Moreland
Liner and rebuild work on Upper Moreland homes falls into a handful of jobs, and which one you need depends on what the camera finds. Here are the ones we’re called for most.
Stainless Steel Liner
A stainless liner is the standard fix for a flue that’s cracked, offset, or undersized for the appliance venting into it. In some Upper Moreland homes, a gas insert or a wood stove was dropped into the original clay flue without anyone sizing it, and the draft problems that follow get mistaken for a sweeping issue. A properly sized stainless liner corrects that. We measure the flue and the appliance, then build the liner to fit.
Flexible Liner
Flexible stainless is how we reline chimneys that have offsets or a slight bend in the flue, which is common in mid-century homes here. DuraFlex systems let us run a continuous liner through a flue that won’t take a rigid section, so the chimney gets a code-compliant reline without tearing into the masonry. If your flue is straight and undamaged, a rigid liner may be the better call. We’ll tell you which applies.
Liner Replacement
Liner replacement is the job when the original clay tile has sheared at a joint or cracked through. Decades of freeze-thaw will do that to a 1960s flue. Once the tile fails, creosote and moisture reach the masonry around it, and a patch doesn’t solve that. We remove the failed liner, inspect the surrounding structure, and install a new system sized to how you actually use the fireplace. Read more about the full scope on our chimney liner & rebuild page.
Partial Rebuild
Partial rebuild covers the chimney above the roofline, where the worst of the weather hits. Cracked crowns, spalling mortar joints, and rusted chase covers all show up in Upper Moreland, and all of them let water into a chimney that’s otherwise sound. We rebuild the damaged section and match it to the existing masonry. Chimney work done to last, not patched until next season.
What Upper Moreland’s Housing Stock Means for Your Chimney
Upper Moreland’s chimney work is shaped by its mid-century building boom. Thousands of split-levels and ranches went up between 1955 and 1975 with original masonry fireplaces and clay-tile flues. Many of those homes are now on their second or third owner and are overdue for their first major cleaning and relining. That’s the baseline. What’s specific to Upper Moreland is what’s behind the brick: a large share of the 1960s homes here were framed with a combustible wood chase hidden behind the brick face rather than built as solid all-masonry chimneys. So relining or rebuilding often starts as a chase inspection, not a flue job. When a technician spots a rusted chase cover or bowed siding, a routine sweep turns into a Level 3 inspection, and sometimes a partial rebuild. That pattern is far less common in the old all-masonry chimneys of Philadelphia’s rowhouse neighborhoods. There’s a second local wrinkle, too. The older stone-farmhouse pocket near the Willow Grove line carries oversized, irregular flues that need custom brushes and hand-built liner sizing before any stainless can go in. A stock brush and a stock liner don’t fit those chimneys, so we measure and fit each one individually.
Trusted Brands We Service in Upper Moreland
The materials in a chimney are the job. We work with a curated roster of professional-grade brands: DuraFlex flexible stainless for relining, HeatShield ceramic resurfacing for flues that can be restored rather than replaced, and Famco and Copperfield components for caps, crowns, and the parts that finish a system. Those names matter because they’re what the trade actually specifies, and they hold up under the heating season this region puts them through. We don’t claim to hold parts in stock; we specify the right component for your chimney and let the written estimate set the price. That keeps the turnaround predictable and the work built to last.
Common Chimney Liner & Rebuild Problems We See in Upper Moreland Homes
- Cracked or sheared clay flue tiles. Original clay liners in 1955 – 1975 split-levels crack or shear at the joints after decades of freeze-thaw, which lets creosote and moisture reach the surrounding masonry. Once a tile joint opens, a cleaning doesn’t address the real problem.
- Rusted or bowed combustible wood chases. Many 1960s Upper Moreland chimneys have a wood chase framed behind the brick face, and over time those rust out or bow. A routine sweep can turn into a Level 3 inspection and often a partial rebuild once that’s discovered.
- Gas conversions and inserts in unlined or undersized flues. When an insert goes into an original flue that was never sized for it, condensation and draft problems follow. Those get misread as a sweeping issue rather than the liner sizing failure they are.
- Cracked crowns and spalling mortar joints. Cold Pennsylvania winters and their freeze-thaw cycles crack exterior crowns and open mortar joints, which is why a spring inspection matters as much as a fall cleaning. Water gets in through those cracks all year.
See the difference
Before
After
Before
After
Before
AfterHow a Typical Liner or Rebuild Job Goes in Upper Moreland
On a typical 1960s Upper Moreland split-level, the homeowner burns supplemental heat from October through April and doesn’t think about the flue until a rust streak shows on the chase cover or the damper won’t seat. When a technician pulls the cap, the original clay-tile liner is often cracked or offset at a joint, and the smoke chamber is coated in glazed second-degree creosote that a standard brush won’t touch. At that point the job shifts to a Level 2 or Level 3 inspection, and from there to a HeatShield-resurfaced or stainless liner sized to the appliance, with spalling mortar joints and a cracked chimney crown rebuilt at the same time. In the stone-farmhouse pocket near the Willow Grove line, the same call becomes a custom-brush and hand-sized liner job, because the flue is oversized and out of round. Same trade, different approach. The one constant is that nothing is recommended until you’ve seen the camera footage. And when work can safely wait, we’ll say so.
Pricing for Chimney Liner & Rebuild in Upper Moreland, PA
Here’s roughly what this work runs in Upper Moreland. A typical stainless steel liner runs $2,400 – $4,800 depending on flue length, diameter, and whether the flue needs a HeatShield resurfacing first. A flexible liner for an offset flue typically lands in the same range, with the sizing work added when the flue is irregular. A partial rebuild above the roofline runs $1,800 – $5,500, depending on how much masonry is involved and whether the crown or chase cover needs replacing. A full rebuild is a larger project and gets priced from the inspection, not before it. The written estimate sets the final price, and the estimate itself is free. If you want an exact figure, call (844) 526-7704 to book the inspection.
We Also Serve Cities Near Upper Moreland
The same liner and rebuild work covers the towns around us. We also work in Maple Glen, Upper Dublin, Warminster Heights, and Rockledge, where the housing stock and heating season are much the same. If you’re in any of those and need a flue looked at, the process is identical: camera inspection, evidence you can see, then a written estimate. Read more about our service across Upper Moreland and the surrounding area.
Serving Upper Moreland, PA – Our Local Coverage Area
We serve Upper Moreland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Liner & Rebuild in Upper Moreland
Yes. Each flue vents its own appliance, so each one develops its own creosote load, condensate, and wear. A flue used for supplemental heat from October through April builds creosote faster than one lit a few times a year, and the one you don’t inspect is the one that fails silently. Book both on the same visit, and call (844) 526-7704 for a free estimate.
A technician confirms it by pulling the cap and looking at the chase cover and framing, not by looking at the brick face from the ground. The clues that prompt the look are a rusted chase cover, bowed siding near the chimney, or rust streaks on the interior. A Level 3 inspection settles it. Call (844) 526-7704 if you’ve noticed any of those signs.
Yes, but it’s a hand-sized job. Oversized, out-of-round flues need to be measured and the liner built to fit, so the result vents correctly and meets code. A stock liner dropped into a flue that large won’t draft right. We size these individually. Call (844) 526-7704 to book the measurement.
First-degree creosote is the light, flaky soot a standard brush removes. The glaze you’re seeing is second-degree, a hardened, tar-like coating that a brush won’t touch and that needs chemical treatment or resurfacing to clear. That’s the point where a cleaning turns into a liner or HeatShield job. Call (844) 526-7704 for a free estimate.
In most cases both get done in the same job. A cracked crown lets water into the very masonry the new liner is meant to protect, so doing the liner alone leaves the failure in place. We’ll tell you what we found, what it means, and what fixing it actually involves. Call (844) 526-7704 for an exact quote; estimates are free.
Book Your Upper Moreland Chimney Inspection
If your fireplace has been working harder than usual and you’re not sure what’s behind the smoke, the answer comes from a camera down the flue, not a guess from the driveway. Call (844) 526-7704 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours books into the next opening. We tell you what we found, what it means, and exactly what fixing it involves.
Written by the team at Chimney Sweep Fox Chase.